Simply expand your measuring systems
Do you need additional measuring channels on your measuring devices or would you like to record additional measurement variables? Does transmission via Bluetooth make sense for you, or perhaps you would prefer to access measuring devices and measurement data via the company network?
Then our MultiXtend expansion modules are the perfect solution for you!
Upgrading your measuring system
MultiXtend products offer additional inputs for sensors with analog or frequency input signals and allow the connection of thermocouples. Simply connect to your existing network via LAN or wirelessly via Bluetooth.
Product categories
MultiXtend Bluetooth
Upgrade to wireless data transfer with our MultiXtend Bluetooth module. Save yourself the use of expensive measuring cables yet rely on secure data transmission up to 300m via paired transmitter-receiver units. Additional advantage: Spending time in hazardous areas, such as rotating machines, is a thing of the past.
MultiXtend LAN
Would you like worldwide access to your measuring system? Plus easy editing of stored parameters or the capability to start measurements remotely? Our MultiXtend LAN allows integration of your measuring system into an existing network (TCP/IP). In combination with our HYDROLink6 software, you can use all the features of network-based measurement data acquisition.
MultiXtend A / f / Thermo
Do you need to expand your existing measuring technology with additional sensors? Not a problem with the MultiXtend A, f and Thermo series! Sensor signals are digitized and transmitted to the measuring device via CAN bus. Our MultiXtend channel extensions A and f each offer four M16 inputs for analog/frequency sensors and can be used with input ranges from 0 to 20 mA or 4 to 20 mA wheras the Thermo channel expansion allows the connection of standard thermocouples type J or K.
Catalog
Technical information MultiXtend A
Technical Information MultiXtend f
Technical Information MultiXtend Thermo
MultiXtend UI
Are you looking to integrate current or voltage measurements into your recordings? Our MultiXtend can be used for analog measurement input from 0 to 20 mA, and along with the existing galvanic isolation of the measurement inputs, you have the option to manually activate a PWM filter.
MultiXtend Split
MultiXtend Split is an absolutely potential-free and feedback-free galvanic signal splitter allowing you to simultaneously connect a single sensor to two receivers. This means, you can connect a permanently installed pressure sensor to the controller and tap the signal for diagnostic purposes.
MultiXtend Trigger
Are you looking to store data on several measuring systems simultaneously? The MultiXtend Trigger is capable of transmitting one trigger signal to up to three measuring systems. For instance, a storage trigger can be initiated by the MultiSystem 5070 for a maximum of three additional measuring systems at the same time. This allows synchronized storage on up to 96 channels, which can subsequently be merged automatically on a PC with our HYDROcom6 or HYDROLink6 software solutions.
