Quality made to measure
Our solutions for exceptional challenges: Are you facing a challenging installation situation, do you need to group multiple measuring points at one central location or retrofit an existing system? No problem with the adapters for our original MINIMESS® test points.
Saving resources through clever assembly
Our adapters are available in all standard coupling sizes. Benefit from all features of the classic MINIMESS® coupling combined with a fitting body made of free-cutting steel or stainless steel. Upon request, we can assemble hose lines according to your specific requirements for easy access to all measuring points in one location.
Product categories
Original MINIMESS® test points with DKO fitting
Our MINIMESS® test points with connectors for all standard 24° DKO fittings for easy application or retrofitting of test points in systems with sealing cone connections in compliance with DIN 2353 / ISO 8434-1.
Original MINIMESS® test points with DKO combi fitting tee
The perfect solution for easy retrofitting and application between socket and hose: MINIMESS® test points with combi fitting.
Original MINIMESS® test points with tee adapter
Our MINIMESS® test points with tee fittings allow easy retrofitting and application in existing piping systems using cutting ring fittings in compliance with DIN 2353 / ISO 8434-1.
Original MINIMESS® test points with 90° swivel fitting
Thanks to the swivel fitting, customized adjustment of test point positions to suit the installation situation is easy. The MINIMESS® test point can be swiveled 360° around the bore axis, thus allowing optimal positioning. A DKA ring is used to seal the screw-in thread (banjo bolt).
Original MINIMESS® bulkhead test point
Our MINIMESS® bulkhead test points allow the combination of multiple measuring points at a central system service point thus significantly reducing maintenance requirements.
Original MINIMESS® bulkhead test points with MINIMESS® connectors on both sides
Thanks to our bulkhead test points with MINIMESS® connections on both sides, multiple measuring points can be grouped at a central system service point using MINIMESS® hose lines.
Original MINIMESS® test points with 37° flared fitting
Our MINIMESS® test points with connection for a 37° flared fitting in compliance with SAE J514 can be connected directly to the appropriate pipework.
Original MINIMESS® test points with ORFS fitting
Our MINIMESS® test points for ORFS fittings in compliance with ISO 8434-3 / SAE J1453-1 allow direct connection to appropriate ORFS sockets.
